With IP based amplifier you will enjoy a quicker and more flexible installation than traditional wired analog systems.
Rear Panel:
① Terminal interface: connect with PC via configuration cable.
② Internet: Ethernet interface, after access Ethernet cables, LAN normally on a green light,
if yellow light is shining, means terminal and data communication network switch is normal,
otherwise, means the connection terminal and a network switch is abnormal, need to check
network cable whether in good connection.
③ Audio output: connect earphone.
④ Audio input: connect MIC.
⑤ Line input: connect audio source input.
⑥ Line output: Audio output, connect with speaker.
|
Model |
RH8300 |
|
Power supply |
DC12V/3A with AC adapter |
|
Power consumption |
≤10W |
|
Audio bit rate |
8Kbps~320KbpsSelf- adaption |
|
Frequency response |
40Hz~20KHz(±3dB) |
|
THD |
≤1% @1W |
|
SNR |
>80dB |
|
Sampling rate |
8K~48KHz |
|
"Line In" input level |
400mV (Standard 3.5mm audio port) |
|
"Line Out" output level |
0.775mV (Standard 3.5mm audio port) |
|
Built in speaker |
8Ω/5W |
|
Audio format |
MP3, ADPCM |
|
Transmission speed |
10/100Mbps |
|
Support protocol |
ARP、UDP、TCP/IP、ICMP、IGMP( Group play) |
|
Internet delay |
≤50ms |
|
Gooseneck length |
410mm |
|
Base dimension |
240*150*56mm |
|
Net weight |
1.60kg |
|
Gross weight |
2.20kg |



we will contact you within 24 hours.